Home > Ras Error > Ras Error Return Value 255

Ras Error Return Value 255

The service should restart in an attempt to clear the failure. The system returned: (22) Invalid argument The remote host or network may be down. Verify that the device is configured with digest credentials and is able to respond to 401 challenges with an Authorization header. It is also possible to get this error if the Unified CM node is experiencing high CPU usage. my review here

The device did not provide an Authorization header after Unified CM challenged with a 401 Unauthorized message. No action is necessary; the device will re-register automatically. 18 DeviceNoResponse - The device did not respond to a reset or restart notification, so it is being forcefully reset. Reason Code - Enum Definitions Enum Definitions - Reason Value Definition 0 None Defined Error Message CCM_CALLMANAGER-CALLMANAGER-5-DChannelISV : D-channel is in service Channel ID[UInt] Unique Channel ID[String] Device Name[String] Device IP If the device does not re-register within 5 minutes, verify that it is powered up and verify that network connectivity exists between the device and Unified CM. 6 ConnectivityError - Network

Unregistration also occurs if Unified CM receives a duplicate registration request for this same device. Recommended ActionIn the Cisco Unified Reporting tool, run the Unified CM Multi-Line Devices report and check the number of lines that are supposed to be configured on the device identified in It is also possible to get this error if the Unified CM node is experiencing high CPU usage.

In cases of normal unregistration with reason code 'CallManagerReset', 'CallManagerRestart', or 'DeviceInitiatedReset', the severity of this alarm is lowered to INFORMATIONAL. Cisco recommends that you restart the Cisco CallManager service. If resetting the phone doesn't fix the issue, restart TFTP and Cisco CallManager services. This is generally a normal occurrence when you are upgrading a Unified CM node.

Generated Tue, 25 Oct 2016 22:03:19 GMT by s_wx1196 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection Possible causes include device power outage, network power outage, network configuration error, network delay, packet drops, and packet corruption. First go to the Cisco Unified Reporting web page, generate a Unified CM Database Status report, and verify that "all servers have a good replication status." If DB replication looks good, It's free: ©2000-2016 nixCraft.

Verify that the X.509 Subject Name field has the appropriate information. Also, check the Phone Configuration page to determine whether the phone is associated with the specified end user in the Digest User drop-down list box. Even if i use abort() the exit status is 0. Network connectivity problems can affect device registration, or the restoration of a primary Unified CM may interrupt registration.

Error Message CCM_CALLMANAGER-CALLMANAGER-5-H323Started : Unified CM is ready to handle calls for the indicated H.323 device Device Name[String] IP Address[String] Device type[Enum]Device description[String] The Server 1 IP Address/Host Name as configured If the problem still persists, restart the TFTP service and Cisco CallManager service. 15 CallManagerRestart - A device restart was initiated from Unified CM, either due to an explicit command from Possible causes include a change in the IP address or port of the device. Schedule ABureau of the Census, 1981 - Commercial products 0 Reviewshttps://books.google.com/books/about/U_S_General_Imports.html?id=za5NAQAAMAAJ Preview this book » What people are saying-Write a reviewWe haven't found any reviews in the usual places.Selected pagesPage 74Page

In the case of a device rehoming to the primary Unified CM node, watch for a successful registration of the device on the primary node. this page Other causes for this alarm could include a phone being registered to a secondary node and then the primary node coming online, which causes the phone to rehome to the primary command. No action is necessary; the device will re-register automatically. 14 ConfigurationMismatch (SIP only) The configuration on the device does not match the configuration in Unified CM.

Reply Link Rahul July 23, 2013, 12:43 pm @Vivek / all I want something like ssh [email protected] " [ -e /some/path ] " and then $? = 0 then print file If the device does not re-register within 5 minutes, confirm that the device is powered-up and confirm that network connectivity exists between the device and Unified CM. 19 EMLoginLogout - The Or, lack of a KeepAlive being returned from the Unified CM node to which this device was registered. get redirected here The alarm could indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.

General Imports: Schedule A, commodity by countryFull view - 1977View all »Common terms and phrases$251 are shown 0ENMARK 0F TEXTILE 0RES 0VER ALL0yS ARTICLES 0F AUSTRAL AUSTRIA BELGIUM C.I.F. Reason Code - Enum Definitions Enum Definitions - DeviceType Value Definition 1 CISCO_30SP+ 2 CISCO_12SP+ 3 CISCO_12SP 4 CISCO_12S 5 CISCO_30VIP 6 CISCO_7910 7 CISCO_7960 8 CISCO_7940 9 CISCO_7935 12 CISCO_ATA_186 Reason Code - Enum Definitions Enum Definitions - PerfMonObjType Value Definition 1 Cisco CallManager 2 Cisco Phones 3 Cisco Lines 4 Cisco H323 5 Cisco MGCP Gateway 6 Cisco MOH Device

You can also go to Real-Time Reporting Tool (RTMT) and check the Replication Status in the Database Summary page.

Verify the DNS server configured via the OS Administration CLI is correct and that the DNS name used by the device is configured in the DNS server. 6 ConnectivityError - The Check the REGISTER message for any of these issues and if you find one, correct the issue. 15 ProtocolMismatch - The protocol of the device (SIP or SCCP) does not match Molyneux, M. Check the REGISTER message for any of these issues and if you find one, correct the issue. 12 SCCPDeviceThrottling - (SCCP only) The indicated SCCP device exceeded the maximum number of

Recommended action is for the device to regenerate its certificate with the AES_128_SHA cipher algorithm. 14 MalformedRegisterMsg - (SIP only) A SIP REGISTER message could not be processed because of an No action is required if this event was issued as a result of a normal device rehome. If this occurs repeatedly, collect SDL/SDI detailed traces with "Enable SIP Keep Alive (REGISTER Refresh) Trace" under Cisco CallManager service turned on and contact the Cisco Technical Assistance Center (TAC). http://vealcine.com/ras-error/ras-error-return-value-5.php To correct this problem, configure this device in Unified CM Administration. 3 DatabaseConfigurationError - The device is not configured in the Unified CM Administration database and auto-registration is either not supported

This generates a change notification message to the Cisco CallManager and TFTP services and rebuilds a new configuration file. Network connectivity problems can affect device registration, or the restoration of a primary Unified CM may interrupt registration. Verify that the device is powered up and operating, verify that network connectivity exists between the device and Unified CM, and verify that the CPU utilization is in the safe range If the device is a SIP phone and is enabled for digest authentication (System > Security Profile > Phone Security Profile, check whether the Enable Digest Authentication checkbox is checked), verify

To correct this problem, configure this device in Unified CM Administration. 4 DeviceNameUnresolveable - For SIP third-party devices this means that Unified CM could not determine the name of the device When an individual device exceeds the number configured in that service parameter, Unified CM closes the TCP connection to the device; automatic reregistration generally follows.