Home > Error Occurred > Raid Error Occurred 0

Raid Error Occurred 0

Contents

I'm a little squeamish about doing this at this point until my large hard disk arrives so that I can first backup the entire hard disk. > > If you have Anyway: I installed the Intel Matrix Storage Manager which IS compatible with my hardware (even though my hardware was very old - from 2004). Maybe we can spot some problem. This took the bit flip error setting of the drive and reset it to off. More about the author

EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70 So I installed my GTX 1080 Classified, but then I noticed that the PCB is seriously bent ! What else can I do? Anyway my system is fine, accept when I am gaming and it just does the same as before and crashes during game. Obviously the error is erroneous because the drive has been functioning with no problems at all.

Intel Rapid Storage Technology Raid Error Occurred (0)

How do I reset it? I plug the cable into the left-most socket for drive 0 and I plug in drive 1 to the socket to the right. Upon the next reboot the problem has gone away - and has not come back since. #14 (permalink) 03-18-2010, 02:01 AM Ropey Junior Member Join Date: Mar 2010 About a man and a bee Intersection of N lists, or of an N-d array Why was Toph put in a wooden cell in the Fire Nation city in Season 3

or did you get around it by other means? Discuss "Error Occurred(0)" with RAID 0. Author Post Essentials Only Full Version OV3RCLK4 CLASSIFIED Member Total Posts : 4113 Reward points : 0 Joined: 2008/08/29 14:41:44Location: Tallahassee, FL Status: offline Ribbons : 21 2012/04/13 14:57:12 (permalink) My Ssd Error Occurred(0) Content Relevant URLs by vBSEO 3.6.0 PL2 View Mobile Site LinkBack LinkBack URL About LinkBacks Bookmark & Share Digg this Thread!

So how do I go about fixing it? Error Occurred (0) Hard Drive m 0 l Design1stcode2nd 5 January 2014 04:23:25 After looking into it the system is 6 1/2 years old so I am getting a new one. Error Occurred (0) Screenshot: Port Drive Model / 0 / Error Occurred (0) Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Leave the disk in the DVD drive , you'll be booting from it in a minute.

the error occurred why preparing the partition selected for installation. Raid Error On Boot Up Dying disk. I noticed this was obviously not right, yet my system booted and was fine for "normal" activities (I put my system at its default clocks). Make 2 profiles( i believe your mobo has this option) in the bios one for Normal and one for OC settings.

Error Occurred (0) Hard Drive

Upon the next reboot the problem has gone away - and has not come back since. « Epson scanner front buttons | DNS Resolution » Thread Tools Show Printable Version Email But an extra monitor would be nice also as it would really bring a great gaming experience along with my 5870. Intel Rapid Storage Technology Raid Error Occurred (0) Forgot your Username? Intel Matrix Storage Manager Error Occurred 0 Raid 1 Conflict0s says thanks.

please reffer to DXError.log and directx.log in your windows to determine problem. http://vealcine.com/error-occurred/raid-0-error-occurred-fix.php That can easily be fixed by running chkdsk, which is the first thing you should have done.Click to expand... Check your sata cable to the drive to and right click the drive in that program and see if you can re enable it. Like so: http://i10.tinypic.com/2qvgtpt.jpg There are four SATA sockets there and you are using two of them. Raid 1 Error Occurred 0

until those ports went bad too and I had to RMA my motherboard. In comp.sys.ibm.pc.hardware.storage John wrote: > During boot up, one of my two week old hard disks in my RAID 0 is now > reporting this error: > "Error Occurred(0)" > Since it's a RAID0 config, your drives will look like gibberish to the OS if you turn off RAID. click site Please check out our forum guidelines for info related to our community.

Than I replaced the power supply, a 800W XIGMATEK MRP MC802, with an identical one in my daughters PC. Raid 0 Error Occurred Windows 7 Ask ! Thanks!

Then follow these steps to resolve the issue: Launch the Intel Matrix Storage Console software that you now have from the installation and open up the tree view to examine my

I did first verify that all connections, SATA and power supply to the HDDS were OK. Then just look at which one the cables are plugged into. I had to initialize the drive I bought before I could format it, would I need to do the same before I install a bare drive in the old machine (at Physical Disks Error Occurred (0) Power Zone 1000W Mouse: Corsair Gaming CG M65 RGB Keyboard: Corsair Vengeance K70 Brown MX Software: Windows 7 Premium 64-Bit UPDATE: Luckily I haven't been pushing my RAM, I kept it

Thanks posters, and thanks Google Search for meaningful hits. #17 (permalink) 05-26-2012, 04:26 PM Hellmut1956 Junior Member Join Date: May 2012 Posts: 1 3 of 4 HDDs failed Or do you think I should just do a fresh install and just redo my RAID array and keep my hard drives? Or when your OS crash many time, and cause corruptions, this is a software thing, so it will be fine when the OS stop crashing, lol. navigate to this website After about 20 minutes in (like before) the game crashed (no BSOD though) but this time the Intel Matrix Console popped up saying that my RAID array was yet again bad

After that i have reinstalled Intel Rapid Storage Technology (RST) and fixed the error. Is that it? Memory: 32gb DDR3 2133mhz Corsair Dominator Platinum Video Card(s): 2x Gigabyte 780Ti Gigahertz Edition in SLI Hard Disk(s): 1TB Samsung 850 EVO SSD LCD/CRT Model: 1x 30" Dell U3011, 2x 24" Is it possible to switch between these two > or is the existing RAID setup exclusive to one of them? > > Mike That's an excellent question.

I will overclock my system in the future, but I just don't want to risk of this happening again if my overclock did effect this.Click to expand... I am just glad my system hasn't crashed, giving me some time to think. (You must log in or sign up to reply here.) Show Ignored Content Currently Active Users What I had meant was what would happen if I had go into 'Computer management console'->'Device Manager'->'SCSI and RAID controllers' and disabled one of the controllers then restarted the computer? I downloaded the WD diagnostics, it found a bad spot that SMART had been trying to report.

One of the thing I did notice, was that none of the programs I tried could read the SMART status of either drive. Power Zone 1000W Mouse: Corsair Gaming CG M65 RGB Keyboard: Corsair Vengeance K70 Brown MX Software: Windows 7 Premium 64-Bit Bad news Just started to play Battlefield Heroes again with a In here the drives show the reported error as well.