Home > Error Occurred > Raid 1 Degraded Error Occurred 0

Raid 1 Degraded Error Occurred 0


John wrote: > I wonder what the consequences will be by disabling a RAID controller? In here the drives show the reported error as well. Two days ago, I turned on my computer, and the raid status (Intel raid) had changed to Rebuild. Then just look at which one the cables are plugged into. More about the author

Ask ! Obviously the error is erroneous because the drive has been functioning with no problems at all. m 0 l Design1stcode2nd 2 January 2014 00:40:35 Looks like the raid software I have is Intel Matrix Storage Console. Usually re-booting the system got it going again but I could never find the problem.

Intel Rapid Storage Technology Raid Error Occurred (0)

I have had on of my drives with this error message for well over a year. Upon the next reboot the problem has gone away - and has not come back since. « Epson scanner front buttons | DNS Resolution » Thread Tools Show Printable Version Email Upon the next reboot the problem has gone away - and has not come back since.

This fixed the issue for me. Discuss "Error Occurred(0)" with RAID 0. Like so: http://i10.tinypic.com/2qvgtpt.jpg There are four SATA sockets there and you are using two of them. Raid 0 Error Occurred Fix Upon the next reboot the problem has gone away - and has not come back since. #15 (permalink) 09-01-2010, 10:50 PM jayjay123 Junior Member Join Date: Sep 2010

Lenovo W520 Laptop with i7, Win7 64, 8 gig Ram,. 500 gig notebook drive.Received errors in Lenovo Solution Center stating Hard drive errors. Intel Matrix Storage Manager Error Occurred 0 Raid 1 It is a single drive of the two that were in a Raid 1 set but the current drive only was removed from the Raid set as an attempt to get I have an ASUS 6PTSE Motherboard with 4 1TByte HDDs in a single RAID10 with W7 64 Ultimate. Use smartctl --scan to get some ideas of what you should try (they will likely be /dev/csmiX), then provide output from smartctl -x for both drives in the array.

Click here to Register a free account now! Raid Error On Boot Up I just don't want to make things worse.Any advice would be appreciated.ThanksJeff Like Show 0 Likes(0) Actions 6. After a while, I finally decided to change to a single Raptor 74gig in part becauise I wanted to replace the RAID array drives with some other drive for troubleshooting. Back to top #9 pcfreak101 pcfreak101 Topic Starter Members 5 posts OFFLINE Local time:01:08 PM Posted 27 March 2010 - 06:49 PM Well, as far as I can tell, things

  • i keep trying to restart with ctrl+alt+del but it's still n solution RAID0 Error Occured & RAW Filesystem solution SolvedRAID 1 Failure: one drive "error occurred" other "offline member" solution Raid
  • Big Chunk of Internet Goes Down After DDoS Attack Hits Major DNS Provider [Security] by siljaline510.
  • I have two of these disks: Western Digital Caviar SE16 WD3200KS 320GB 7200 RPM 16MB Cache SATA RAID 0 with Intel Matrix Storage Manager Motherboard: ASUS P5B-E (latest BIOS installed).
  • I found that out the hard way.
  • Please try again now or at a later time.

Intel Matrix Storage Manager Error Occurred 0 Raid 1

If we have ever helped you in the past, please consider helping us. I have the manual but I'm not sure what you mean. Intel Rapid Storage Technology Raid Error Occurred (0) Hard to say. Raid 0 Error Occurred (0) I used the configuration where it reads and writes the sectors several times.

Any suggestions on how to obtain the correct upgrade (being that there is no longer any support for this hardware)? my review here After you boot to the operating system, you can get into Intel(R) Matrix Storage Manager and use the option "create RAID from an existing hard drive" which will preserve the data information, on both hard drives (x2).It cost me $1,000.00 to retrieve my information.I live in Kitchener Ontario, Canada.I am surrounded by famous computer information. Then follow these steps to resolve the issue: Launch the Intel Matrix Storage Console software that you now have from the installation and open up the tree view to examine my Raid Degraded Error

Chkdsk also reported no errors. Side note: I would not depend on a controller that gives this type of obscure and entirely unhelpful error messages. If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). click site Mike Walsh alt.comp.hardware 1 07-27-2005 04:58 PM All times are GMT.

One of the drives was indicated as having a SMART Event(0).After some searching online, I thought it would probably be best to replace the drive which was indicated as having the Ssd Error Occurred(0) There is no need to hide or edit the serial numbers -- nobody can do anything with them without physically possessing the drive).Chances are only one of them is misbehaving and What does it mean?.

HDRDTD wrote: > It 'might' be that one of the drives has developed a SMART error. > [snip] > > My point is, One of the drives may have developed a

BLEEPINGCOMPUTER NEEDS YOUR HELP! No special weather, so no external reason for the HW to fail. KruseLudington kept this thread alive and posted a fast, easy to understand solution in this final paragraph. Raid 1 Mirror Degraded So far the system boots into windows just fine.

several hundred gig. In comp.sys.ibm.pc.hardware.storage John wrote: > I installed 'Intel Matrix Storage Console' version 6.2. > It's stating 'Error Occurred' on 'Device Port 0' > 'A drive in a RAID 0 volume I let the rebuilding go over night, and everything reads A-OK. navigate to this website Called them and they send new blank drive but I would like to fix current one.

An early sign of disk failure. Maybe we can spot some problem. Back to top #3 pcfreak101 pcfreak101 Topic Starter Members 5 posts OFFLINE Local time:01:08 PM Posted 25 March 2010 - 11:22 AM Wouldn't SpinRite have found read/write errors and done Degraded means you still got enough disks to access all data on the RAID.